Measurement electrodes, sensors and accesssories

pH-electrode

Articlenumber: PL-0071

The pH-electrodes have a gel electrolyte and a ceramic diaphragm.
3 m cable, BNC-plug

Redox-electrode

Artikelnumber: PL-0093

3 m cable, BNC-plug

Conductivity-electrode, platinum

Artikelnumber: PL-0055

3 m cable, BNC-plug
for freshwater and marine water

Temperature-sensor

Articlenumbers:

PL-0094 measurement range aquarium
PL-0538 measurement range pond

3 m cable, PS/2-plug

Oxygen-sensor

Articlenumber: PL-0368

3 m cable, BNC-plug

Combination sensor humidity/air temperature

Articlenumber: PL-0279

2 m cable, Western-plug

Calibration liquids

Articlenumbers:

PL-0074 pH 4
PL-0075 pH 7
PL-0076 pH 9
PL-0072 220 mV (for Redox)
PL-0059 1.41 mS (conductivity fresh water)
PL-0073 50 mS (conductivity marine water)

Maintenance set oxygen-sensor

Articlenumber: PL-0555

3 replacment membrane heads
6 ampulls electrolyte
sand paper and accessories
comes in a handy box

Flow-through measurement cell

Articlenumber: PL-0628

20 mm PVC-fittings
The flow-through measurement cell can contain up to 4 sensors with a 12 mm-shaft.
An optimized incoming flow supports the self-cleaning of the probes and brings good measurement results, the life span can be increased.
It is operated in the return line or in a bypass.

Level-sensor, floater

Articlenumber: PL-0077

3 m cable, PS/2-plug
only for vertical mounting

Level-sensor, optically

Articlenumber: PL-0082

3 m cable, PS/2-plug
only for horizontal mounting

Level-sensor-holder base unit PL-LF-Base

Articlenumber: PL-0078

Level-sensor-holder base unit with Plexiglas stick and universal mounting.

The solid and versatile sensor-holders are used for mounting and adjusting our level-sensors or other brand’s level-sensors.
The holder can be mounted on vertical or horizontal surfaces.
The height of the sensors can be adjusted steplessly.
For mounting the level-sensors the matching level-sensor-fastener is required.

The picture shows the level-sensor-holder with mounted sensors and sensor fasteners (not included).

Level-sensor-fastener PL-LF-S12, angled

Articlenumber: PL-0723

is necessary to mount the optical level-sensor on the level-sensor-holder base unit

Niveausensoraufnahme PL-LF-S8

Articlenumber: PL-0080

is necessary to mount the level-sensor floater on the level-sensor-holder base unit

New_100x100

Leakage-sensor

Articlenumber: PL-0850

Safe detection of a leakage through 80 spring-loaded contacts on the bottom side of the sensor (picture on the right).
A leakage-interface is necessary for operation.
incl. cable (1.5 m) for connection with the leakage-interface
2 mounting holes
A second port makes it possible to connect several leakage-sensors in a row - multiple measurement loacations increase the security.
Only suited for the detection of conductive water (sensor doesn’t work with osmosis water)!
Please note: Sensor must not be submerged! Only the 80 contacts on the bottom are allowed to get wet.

LeakSensorWithCable_300x198 LeakSensorBottom_200x133

New_100x100

Leckage-interface

Articlenumber: PL-0851

is connected at the level-input of the ProfiLux
incl. PS/2-cable (2 m) for connecting with ProfiLux
2 ports for leakage-sensors

Splitter for level-sensors PL-LY

Articlenumber: PL-0081

For connecting 2 level- or leakage-sensors with the ProfiLux or with the Expansion Box this splitter is necessary.

Sensor extension cable BNC2

Articlenumber: PL-0053

extension cable 2 m, plug-socket
for our sensors with BNC-plug

Sensor extension cable VTN

Articlenumber: PL-0339 VTN-2 (2 m) or PL-0358 VTN-5 (5 m)

extension cable 2 m or 5 m, socket-plug
for our sensors with PS/2-plug

Our solid and low-maintenance probes are produced in Germany according to high quality standards.
Most models have extra long connection cables (3 m).
Calibration can be done easily at the push of a button on the ProfiLux controller.
All probes are galvanically isolated, therefore they can be used in any combination at the same time without issues.

Please pay attention to the conditions of guarantee and warranty on the bottom of this page.

Warranty and guarantee for sensors

Sensors are items which are wearing out during use. The life span depends mainly on the environment and operation conditions, Because of this, it is not possible to offer a credible guarantee for a minimum life span. For electro-chemical sensors a life span of 6 to 24 months is common, for electrical and mechanical sensors a life span of several years is possible.

Therefore the legal warranty is not valid for wear parts. Nevertheless, since we are convinced of the quality of our sensors we offer following guarantees:

Electrical sensors and mechanical sensors (level-sensor, temperature-sensor, conductivity-sensor, humidity-sensor) will be replaced in the first 12 months after purchase. *)
Electrochemical sensors (pH-electrode, redox-elektrode, oxygen-sensor) will be replaced in the first 6 months after purchase. *)

*) Appropriate use, correct maintenance and care presumed. No replacements for broken glass or other mechanical damages.

ProfiLux on Twitter

To the online store of GHL