Leakage Sensor

$37.90

Leakage sensor with 80 spring-loaded contacts, incl. 1.5 m cable

Category: SKU: PL-0850

Description

Play it safe with the flow early warning system of GHL:

The 80 spring-loaded contacts can detect leaking water.

If a leakage occurs, the ProfiLux computer can warn you via an acoustic signal, SMS, and/or email. If desired, it can also turn on/off specific devices in-advance.

A leakage interface is required to connect leakage sensors. Any number of sensors can be connected to the interface.

    • Incl. (1.5 m) connection cable to Leakage-Interface
    • 2 mounting holes
    • A second connector allows you to daisy-chain several leakage sensors to increase safety with additional measuring points

Leak sensors only detect conductive water and are not suitable for use with osmosis water.

Warning: Sensor must not be submerged! Only the 80 contacts on the bottom side should be moisturized.

Additional information

Weight 0.06 kg

About GHL Sensors

All GHL measurement electrodes are made of the highest laboratory grade. They are durable, low maintenance, and matched to the highest German quality standards. Most models feature extra-long connection cables (3 m), which are specially made for use in the aquarium hobby. All sensors are galvanically isolated and can therefore easily be used in parallel in any combination. Please note the below explanations of warranty and guarantee of sensors.

Calibration can be carried out by our menu-guided system in the ProfiLux Controller.

In the section, “sensor accessories” we also offer various sensor holders, calibration fluids, cable extensions and maintenance kits.

The following sensors are available:

  • pH, Redox, Conductivity, Oxygen Sensors
  • Niveau Sensors
  • Water Temperature, Air Temperature and Humidity Sensors
  • Flow Sensors
  • Leakage Sensors und Leakage Interface
  • Sensor Accessories

Warranty and Limited Guarantee for Sensors

Sensors are items that wear out during normal use. The life span of a sensor is dependent on the environment and operation conditions. Due to many possible different circumstances, it is not possible to make an exact prediction about the lifespan. For electrochemical sensors, a life span of 6 to 24 months is common. Electrical and mechanical sensors can operate up to several years with normal care.

Therefore the legal warranty is not valid for these kinds of parts. Instead, GHL offers the following limited warranty for sensors:

Electrical sensors and mechanical sensors (level-sensor, temperature-sensor, conductivity-sensor, humidity-sensor) will be replaced in the first 12 months after purchase.) *

Electrochemical sensors (pH-electrode, redox-electrode, oxygen-sensor) will be replaced in the first 6 months after purchase.) *

*Valid from date of the original invoice, copy of original invoice required. Appropriate and intended use, correct maintenance, and care are required. We offer no replacements for broken glass, damaged cables or connectors, or other mechanical damages.