Hanging Kit Mitras Lightbar, LX 6 / LX7
$43.90Ceiling holder, height adjuster, steel ropes, 2 of each
High-Intensity LED Lighting
Because Stability starts with Accuracy
Ceiling holder, height adjuster, steel ropes, 2 of each
Leakage interface, for connecting leakage sensors to ProfiLux
Mini-DIN, incl. 2 m cable
Magnetic tube holder. Holds up to 5 tubes.
Keep track of your pump and filter performance.
With our flow sensors, you can control the flow rate of your pump and filter.
If flow deviations are detected, ProfiLux can set off an alarm and notify you.
Level sensor, optical
Mini-DIN, 3 m cable
For GHL Doser 2.1
Profilux-Tunze connection cable for controllable Tunze current pumps. Connects to the L1/L3/L5 jack on the Profilux controller.
VTN Extension cable (plug-socket) for extending the cable length of a level sensor.
For float, optical, flow or leak sensor cables.
2 x union nut 5/4″, 2 x glue fitting 3/4″.
Controller for aquarium fan
Speed regulation with ProfiLux, suitable for PropellerBreeze
with socket/plug 2.1mm
Redox-electrode, BNC, 3m cable
Expansion card for ProfiLux 3 and 4, radio module, wireless communication with Mitras LX.
View full product info and configuration guide
Need help setting up?
Profilux-Tunze connection cable for controllable Tunze current pumps. Connects to the L2/L4/L6 jack on the Profilux controller.
2 tubes (l = 145mm +/- 1mm) including cable ties.
For Doser 2.1 Maxi only!
The perfect controller bundle for saltwater aquarists. This set comes with everything you need to get a well-rounded aquarium monitoring and automation system with plenty of room to grow. Experience the best in reliability, safety and performance with a ProfiLux controller.
Set includes:
ProfiLux 4 controller, lab grade probes (temp, pH, redox, conductivity), calibration fluids, Powerbar-6E, and connection cables.
Level Sensor Fastener for Optical sensor version 2; vertical mounting
Extension dosing pump unit without control, 2 pumps, stepper motors, power supply, and tube adapters.
Not a standalone product; requires GHL Doser Standalone or ProfiLux (3 and higher) to operate this device.
Multi-Ion sensor for measuring Calcium, Magnesium, Potassium, Nitrate and Sodium.
Fixture mount for Mitras LX7 for orthogonal installation (light orientation from front to rear)
2 x union nut 1″, 2 x glue fitting 1/2″.
Calibration fluid conductivity 1.41mS/cm
50mL
Controller to connect VorTech/EcoTech current pumps to ProfiLux
NOTICE
Due to EcoTech’s decision to restrict 3rd party control, Vortech pumps running on Mobius firmware will not be controllable via the GHL Vortech controller. This change prevents Vortech firmware from being rolled back and 3rd party control is no longer supported on current model Vortech pumps.
The GHL Vortech controller can only control Vortech pumps running on pre-Mobius firmware.
Splitter cable for connecting 2x 1-10V control cables.
Allows you to connect and individually control 2x 1-10V devices through a single 1-10V port on the ProfiLux controller.
Base part, 2 x clamping ring, 2 x knurled nut for ION and KH Director.