PLM-Humidity-Temp
$87.90Expansion card for ProfiLux and Expansion Box. 1 input for combined sensor air temperature and rel. Humidity




High-Intensity LED Lighting
Because Stability starts with Accuracy
Expansion card for ProfiLux and Expansion Box. 1 input for combined sensor air temperature and rel. Humidity
Measurement device for the determination of alkalinity, with pH-electrode, calibration fluids pH4 and pH7, reagent 500 mL, silicone tube 5 m, EXT dosing pump unit, 4 pumps, stepper motors, with power supply and 2x PAB-cable 50 cm.
High-quality 2.0 L dosing container for liquid additives.
Robust design, clear volume markings, and secure lid with 6 mm tubing fitting – ideal for use with GHL Doser systems.
Expansion card for ProfiLux and Expansion Box
1 galvanically isolated input for conductivity sensor, measurement range 0 – 100 mS
1 galvanically isolated input for pH sensor
Dimmable LED-lamp, LEDs in white, red, green and blue separate dimmable
Simulation of moon, sunrise and thunderstorm
waterproof (IP67), length = 95 cm
for operation Mitras-Simu-Driver is required
Extension dosing pump unit, 2 pumps, stepper motors, with power supply, 4x tube adapters, 50 cm PAB cable
Measurement device for determining Ca, Mg, K, Na, NO3, with MUI sensor, reference fluids A+B 500 mL each, Flex-PVC tube 8 m (315″), Slave Doser 2.2, 4 pumps, with power supply, 2x PAB-cable 50 cm.
Driver for up to 4 Mitras-Simu-Sticks,
max. output current 5 A, with power supply unit for USA/Canada
Expansion card for ProfiLux and Expansion Box. 4 1-10V-interfaces
Expansion card for ProfiLux and Expansion Box
1 switchable galvanically isolated input for pH-value sensor or redox sensor
2 inputs for level- or flow-sensors
Stand Alone dosing unit with integrated controller, 2 Pumps, WiFi, LAN, USB, silent stepper motors, with power supply, USB-cable, 4x tube adapters
IP54-rated enclosure for up to 3 Industrial Line slide-in units. Hinged lid with transparent window and rubber seal, threaded profiles for device mounting, slideable bottom cover for cable and tube routing. Wall-mountable. 39HU usable interior space.
Flow sensor measurement range: 26gph – 528gph
Nominal width DN10, 2x G 3/4″ outside thread, without connection adapter
incl. 2m cable Mini-DIN M12
Highly accurate, stabilized calibration fluids for precise calibration of your GHL sensors. Available as pH buffers (pH 4, pH 7, pH 9.2), conductivity standards (1.41 mS/cm, 50 mS/cm), and a redox standard (220 mV) — each filled to 50 mL.
Coral Pop model
Measurement device for the determination of alkalinity, with pH-electrode, calibration fluids pH4 and pH7, reagent 500 mL, silicone tube 5 m, EXT dosing pump unit, 4 pumps, stepper motors, with power supply and 2x PAB-cable 50 cm.
Industrial Line slide-in unit (7HU) for power switching in the ProfiLux ecosystem. 6 individually controllable C13 outlets – simply plug in your devices. Integrated switch with fuse (10A/230V or 15A/115V). Connection and control via PAB (ProfiLux Aquatic Bus).
High-quality GHL ceramic mug with brilliant and burnt sublimation print, dishwasher safe h x d = 95 mm x 82 mm, 340 m
Replacement motor for dosing pump with connection cables
With Novoprene tube (di = 2.5mm, l = 150mm)
Suspension kit for ceiling-mounting the Mitras LX8 with flexible height adjustment and 4-point load distribution. Includes 2x ceiling mounts, 2x 2 m steel cables, 2x Y-Gripper cable clamps, 2x 25 cm steel cables with double eyelets, and 4x M4 stainless steel screws.
Power supply (24V/2.5A) with protective earth connection for all GHL Doser 2.x, Doser 3, and Doser Maxi models — both Stand Alone and Extension variants. Required accessory for Industrial Line dosing units. Wide-range input (100–240V, 50/60 Hz) with country-specific IEC power cord. Protective earth connection for maximum EMI immunity and electrical safety.
High-power LED light bar, various light temperatures, and 169-210 cm lengths. Suitable for highly increased light requirements.
Power supply not included, please order separately.
Sylvania Quicktronic Electronic T5 Dimmable Ballast, 120V
Supports 1x 54w T5 bulb & 1-10V dimming
2x RJ45
Dimmable LED-lamp, LEDs in white, red, green and blue separately dimmable
Simulation of moon, sunrise and thunderstorm
waterproof (IP67), length = 55 cm
for operation Mitras-Simu-Driver is required
Adapter for connecting 3x level- or leak sensors, automatic feeder and Mitras Lightbar or Slimline to ProfiLux Mini (WiFi) and ProfiLux Light (WiFi)
Stainless steel V4, height 22 mm.
Expansion card for ProfiLux and Expansion Box
1 switchable input for conductivity sensor, measurement range 0 100 mS or 0 2 mS, galvanically isolated
1 switchable input for pH-value sensor or Redox sensor, galvanically isolated
6mm-5mm hose nozzle, connector for hoses, PU = 4 pieces