Dimmable LED-lamp, LEDs in white, red, green and blue separate dimmable
Simulation of moon, sunrise and thunderstorm
waterproof (IP67), length = 95 cm
for operation Mitras-Simu-Driver is required
Extension dosing pump unit, 2 pumps, stepper motors, with power supply, 4x tube adapters, 50 cm PAB cable
Industrial Line slide-in unit (7HU) for power switching in the ProfiLux ecosystem. 6 individually controllable C13 outlets – simply plug in your devices. Integrated switch with fuse (10A/230V or 15A/115V). Connection and control via PAB (ProfiLux Aquatic Bus).
Measurement device for determining Ca, Mg, K, Na, NO3, with MUI sensor, reference fluids A+B 500 mL each, Flex-PVC tube 8 m (315″), Slave Doser 2.2, 4 pumps, with power supply, 2x PAB-cable 50 cm.
Driver for up to 4 Mitras-Simu-Sticks,
max. output current 5 A, with power supply unit for USA/Canada
Expansion card for ProfiLux and Expansion Box. 4 1-10V-interfaces
Out of stock
Highly accurate, stabilized calibration fluids for precise calibration of your GHL sensors. Available as pH buffers (pH 4, pH 7, pH 9.2), conductivity standards (1.41 mS/cm, 50 mS/cm), and a redox standard (220 mV) — each filled to 50 mL.
Expansion card for ProfiLux and Expansion Box
1 switchable galvanically isolated input for pH-value sensor or redox sensor
2 inputs for level- or flow-sensors
2x RJ45
Power supply (24V/2.5A) with protective earth connection for all GHL Doser 2.x, Doser 3, and Doser Maxi models — both Stand Alone and Extension variants. Required accessory for Industrial Line dosing units. Wide-range input (100–240V, 50/60 Hz) with country-specific IEC power cord. Protective earth connection for maximum EMI immunity and electrical safety.
Stand Alone dosing unit with integrated controller, 2 Pumps, WiFi, LAN, USB, silent stepper motors, with power supply, USB-cable, 4x tube adapters
Coral Pop model
GHL Doser 2.2 Maxi Extension in a 9HU aluminum slide-in housing for rack and cabinet installations. 2 high-flow peristaltic pumps with 24V stepper motors, up to 320 ml/min flow rate, 0.1 mL resolution. Connects via PAB to a Doser SA IL, Doser Maxi SA IL, or ProfiLux controller. No power supply included.
Flow sensor measurement range: 26gph – 528gph
Nominal width DN10, 2x G 3/4″ outside thread, without connection adapter
incl. 2m cable Mini-DIN M12
GHL Doser Base – the base for every GHL Doser with integrated tube routing. The Doser sits on top, the tubes run from the pump heads through the openings in the aluminum front panel, pass through the base and exit at the rear. The front stays clean, with no tubes hanging in view. Same footprint and housing design as all GHL devices.
Measurement device for the determination of alkalinity, with pH-electrode, calibration fluids pH4 and pH7, reagent 500 mL, silicone tube 5 m, EXT dosing pump unit, 4 pumps, stepper motors, with power supply and 2x PAB-cable 50 cm.
High-quality GHL ceramic mug with brilliant and burnt sublimation print, dishwasher safe h x d = 95 mm x 82 mm, 340 m
Replacement motor for dosing pump with connection cables
With Novoprene tube (di = 2.5mm, l = 150mm)
Suspension kit for ceiling-mounting the Mitras LX8 with flexible height adjustment and 4-point load distribution. Includes 2x ceiling mounts, 2x 2 m steel cables, 2x Y-Gripper cable clamps, 2x 25 cm steel cables with double eyelets, and 4x M4 stainless steel screws.
Out of stock
High-power LED light bar, various light temperatures, and 169-210 cm lengths. Suitable for highly increased light requirements.
Power supply not included, please order separately.
Sylvania Quicktronic Electronic T5 Dimmable Ballast, 120V
Supports 1x 54w T5 bulb & 1-10V dimming
Adapter for connecting 3x level- or leak sensors, automatic feeder and Mitras Lightbar or Slimline to ProfiLux Mini (WiFi) and ProfiLux Light (WiFi)
Dimmable LED-lamp, LEDs in white, red, green and blue separately dimmable
Simulation of moon, sunrise and thunderstorm
waterproof (IP67), length = 55 cm
for operation Mitras-Simu-Driver is required
Dosing pump as replacement or for retrofit, with Novoprene tube (di = 2.5mm, l = 150mm), for first Generation Doser
Grounded power supply (12V/1.5A) for all ProfiLux controllers (all versions), Expansion Box 1 and 2, and the original GHL Doser (V1). Required accessory for Industrial Line units that operate on 12V. Wide-range input (100–240V, 50/60 Hz) with country-specific IEC power cord. Protective earth connection for maximum EMI immunity and electrical safety.
Conversion kit to Mitras Flex Mount System 2 LX direction after conversion: from left to right
Stainless steel V4, height 22 mm.
Out of stock
Extension cable for tubular with western plug in three different lengths.
Expansion card for ProfiLux and Expansion Box
1 switchable input for conductivity sensor, measurement range 0 100 mS or 0 2 mS, galvanically isolated
1 switchable input for pH-value sensor or Redox sensor, galvanically isolated
6mm-5mm hose nozzle, connector for hoses, PU = 4 pieces
