ProfiLux
Reliable and safe controlling and measuring
- Getting started with your GHL Device
- How the ProfiLux Aquarium Controller works
- Assign functions to 1-10 V interfaces
- How to: Emergency updates for PAB-devices
- How to customize the GHL Dashboard
- How to setup 1-10V lighting control
- How to add your device to myGHL cloud
- How to backup and restore GHL device settings / probe data
- How to setup heater control
- GHL Vortech controller and Mobius compatibility
- How to calibrate the pH probe
- How to setup Calcium Reactor control
- How to calibrate the Redox probe
- How to calibrate the Conductivity probe
- How to setup 1-10V pump control
- GCC: Change language from German to English
- How to setup STDL4-4 Powerbar on ProfiLux
- How to change ProfiLux / Mitras LX display language
- How to connect via USB
- How to sync myGHL account to GHL Connect app
- How to setup a SHORT Timer function (seconds)
- How to: Control Propeller Breeze fan via ProfiLux
- How to use the GHL Logbook
- How to Setup a Mitras Lightbar 3
-
ProfiLux 3
- Getting started with your GHL Device
- How to create custom wave patterns with ProfiLux
- Which pumps can be controlled by ProfiLux?
- How the ProfiLux Aquarium Controller works
- How to operate GHL Devices
- Assign functions to 1-10 V interfaces
- How to setup ATO control with ProfiLux
- How to setup AWC control with ProfiLux
- How to setup Leakage Detection with ProfiLux
- How to setup Maintenance modes with ProfiLux
- How to setup Feed Pauses with ProfiLux
- How to setup a standard Timer (ON/OFF) function
- How to setup non-dimmable light control
- How to setup 1-10V lighting control
- How to add your device to myGHL cloud
- How to assign PAB-devices
- How to setup Vortech pump control
- How to backup and restore GHL device settings / probe data
- How to setup heater control
- GHL Vortech controller and Mobius compatibility
- How to calibrate the pH probe
- How to setup Calcium Reactor control
- How to calibrate the Redox probe
- How to calibrate the Conductivity probe
- How to setup power loss monitoring / emergency backup program
- How to add a Virtual probe
- Level Control and Leakage Monitoring
- How to setup email and text notifications
- How to record probe values
- How to setup 1-10V pump control
- How to setup a dosing pump schedule
- ProfiLux Expansion Card installation (How-to)
- How to control Mitras LX7 via ProfiLux
- How to setup a Feed Pause delay
- How to setup a Maintenance mode delay
- How to setup skimmer control
- Programmable Logic Examples
- How to setup STDL4-4 Powerbar on ProfiLux
- How to setup return pump control
- How to change ProfiLux / Mitras LX display language
- How to connect via USB
- KH Director Initial Setup (Part 1)
- KH Director Initial Setup (Part 2)
- KH Director Initial Setup (Part 3)
- How to setup GHL Magnetic Stirrers
- How to stop dosing when pH is above (x)
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to restore factory settings
- How to switch SA Doser to EXT mode
- How to set fallback states on a Powerbar
- How to update ProfiLux firmware
- Conductivity-Salinity calculators vs. ProfiLux calculated values
- How to setup GHL Flow Sensors
- ION Director Initial Setup (Part 1)
- ION Director Initial Setup (Part 2)
- ION Director Initial Setup (Part 3)
- How to setup a CYCLIC Timer function
- How to setup Gen 1 Doser on ProfiLux
- How to convert Conductivity probe to FW or SW mode
- How to update PAB Devices
- How to use the GHL Logbook
- Intro to ProfiLux Pump Groups
-
ProfiLux 4
- Getting started with your GHL Device
- How to create custom wave patterns with ProfiLux
- Which pumps can be controlled by ProfiLux?
- How the ProfiLux Aquarium Controller works
- How to operate GHL Devices
- Assign functions to 1-10 V interfaces
- KH Director: Change of Adaptive and Add-On Control from P4 Firmware 7.24 / Doser SA 1.37
- How to setup ATO control with ProfiLux
- How to setup AWC control with ProfiLux
- How to setup Leakage Detection with ProfiLux
- How to setup Maintenance modes with ProfiLux
- How to setup Feed Pauses with ProfiLux
- How to setup a standard Timer (ON/OFF) function
- How to setup non-dimmable light control
- How to setup 1-10V lighting control
- How to add your device to myGHL cloud
- How to assign PAB-devices
- How to setup Vortech pump control
- How to backup and restore GHL device settings / probe data
- How to setup heater control
- GHL Vortech controller and Mobius compatibility
- How to calibrate the pH probe
- How to setup Calcium Reactor control
- How to calibrate the Redox probe
- How to calibrate the Conductivity probe
- How to setup power loss monitoring / emergency backup program
- How to convert a Redox port into a pH port / vise versa
- How to add a Virtual probe
- Level Control and Leakage Monitoring
- How to setup email and text notifications
- How to record probe values
- How to setup 1-10V pump control
- How to: ProfiLux 4 / 4e Emergency Update
- How to calibrate ProfiLux / Mitras touch keys
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- How to setup a dosing pump schedule
- ProfiLux Expansion Card installation (How-to)
- How to control Mitras LX7 via ProfiLux
- How to setup a Feed Pause delay
- How to setup a Maintenance mode delay
- How to setup skimmer control
- Programmable Logic Examples
- How to setup STDL4-4 Powerbar on ProfiLux
- How to setup return pump control
- How to change ProfiLux / Mitras LX display language
- How to connect via USB
- How to update or restore Wi-Fi module firmware
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to: ProfiLux Wi-Fi setup (Static IP)
- KH Director Initial Setup (Part 1)
- KH Director Initial Setup (Part 2)
- KH Director Initial Setup (Part 3)
- About: GHL logo LED color codes
- How to setup GHL Magnetic Stirrers
- How to stop dosing when pH is above (x)
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to restore factory settings
- How to switch SA Doser to EXT mode
- How to set fallback states on a Powerbar
- How to update ProfiLux firmware
- Conductivity-Salinity calculators vs. ProfiLux calculated values
- How to setup GHL Flow Sensors
- ION Director Initial Setup (Part 1)
- ION Director Initial Setup (Part 2)
- ION Director Initial Setup (Part 3)
- How to setup a CYCLIC Timer function
- How to setup Gen 1 Doser on ProfiLux
- How to convert Conductivity probe to FW or SW mode
- How to update PAB Devices
- How to use the GHL Logbook
- How to setup Push Notifications
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- Intro to ProfiLux Pump Groups
- How to Setup a GHL Automatic Fish Feeder
- How to Setup a 1-10V Fish Feeder
-
ProfiLux 4e
- How to create custom wave patterns with ProfiLux
- How the ProfiLux Aquarium Controller works
- How to operate GHL Devices
- KH Director: Change of Adaptive and Add-On Control from P4 Firmware 7.24 / Doser SA 1.37
- How to setup ATO control with ProfiLux
- How to setup AWC control with ProfiLux
- How to setup Leakage Detection with ProfiLux
- How to setup Maintenance modes with ProfiLux
- How to setup Feed Pauses with ProfiLux
- How to setup a standard Timer (ON/OFF) function
- How to setup non-dimmable light control
- How to setup 1-10V lighting control
- How to add your device to myGHL cloud
- How to assign PAB-devices
- How to setup Vortech pump control
- How to backup and restore GHL device settings / probe data
- How to setup heater control
- GHL Vortech controller and Mobius compatibility
- How to calibrate the pH probe
- How to setup Calcium Reactor control
- How to calibrate the Redox probe
- How to calibrate the Conductivity probe
- How to setup power loss monitoring / emergency backup program
- How to convert a Redox port into a pH port / vise versa
- How to add a Virtual probe
- Level Control and Leakage Monitoring
- How to setup email and text notifications
- How to record probe values
- How to setup 1-10V pump control
- How to: ProfiLux 4 / 4e Emergency Update
- How to calibrate ProfiLux / Mitras touch keys
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- How to setup a dosing pump schedule
- ProfiLux Expansion Card installation (How-to)
- How to control Mitras LX7 via ProfiLux
- How to setup a Feed Pause delay
- How to setup a Maintenance mode delay
- How to setup skimmer control
- Programmable Logic Examples
- How to setup STDL4-4 Powerbar on ProfiLux
- How to setup return pump control
- How to change ProfiLux / Mitras LX display language
- How to connect via USB
- How to update or restore Wi-Fi module firmware
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to: ProfiLux Wi-Fi setup (Static IP)
- KH Director Initial Setup (Part 1)
- KH Director Initial Setup (Part 2)
- KH Director Initial Setup (Part 3)
- About: GHL logo LED color codes
- How to setup GHL Magnetic Stirrers
- How to stop dosing when pH is above (x)
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to restore factory settings
- How to switch SA Doser to EXT mode
- How to set fallback states on a Powerbar
- How to update ProfiLux firmware
- Conductivity-Salinity calculators vs. ProfiLux calculated values
- How to setup GHL Flow Sensors
- ION Director Initial Setup (Part 1)
- ION Director Initial Setup (Part 2)
- ION Director Initial Setup (Part 3)
- How to setup a CYCLIC Timer function
- How to setup Gen 1 Doser on ProfiLux
- How to convert Conductivity probe to FW or SW mode
- How to update PAB Devices
- How to use the GHL Logbook
- How to setup Push Notifications
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- Intro to ProfiLux Pump Groups
- How to Setup a GHL Automatic Fish Feeder
- How to Setup a 1-10V Fish Feeder
-
ProfiLux Light
- How to create custom wave patterns with ProfiLux
- How the ProfiLux Aquarium Controller works
- How to operate GHL Devices
- Assign functions to 1-10 V interfaces
- How to setup Maintenance modes with ProfiLux
- How to setup Feed Pauses with ProfiLux
- How to setup a standard Timer (ON/OFF) function
- How to setup non-dimmable light control
- How to setup 1-10V lighting control
- How to add your device to myGHL cloud
- How to backup and restore GHL device settings / probe data
- How to setup heater control
- How to setup 1-10V pump control
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- How to: ProfiLux Mini / Light Emergency Update
- How to setup STDL4-4 Powerbar on ProfiLux
- How to change ProfiLux / Mitras LX display language
- How to connect via USB
- How to update or restore Wi-Fi module firmware
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to: ProfiLux Wi-Fi setup (Static IP)
- How to restore factory settings
- How to update ProfiLux firmware
- How to use the GHL Logbook
- How to setup Push Notifications
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- How to Setup a GHL Automatic Fish Feeder
- How to Setup a 1-10V Fish Feeder
-
ProfiLux Mini
- How to create custom wave patterns with ProfiLux
- How the ProfiLux Aquarium Controller works
- How to operate GHL Devices
- Assign functions to 1-10 V interfaces
- How to setup Maintenance modes with ProfiLux
- How to setup Feed Pauses with ProfiLux
- How to setup a standard Timer (ON/OFF) function
- How to setup non-dimmable light control
- How to setup 1-10V lighting control
- How to add your device to myGHL cloud
- How to backup and restore GHL device settings / probe data
- How to setup heater control
- How to calibrate the pH probe
- How to setup Calcium Reactor control
- How to calibrate the Redox probe
- How to calibrate the Conductivity probe
- How to setup 1-10V pump control
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- How to: ProfiLux Mini / Light Emergency Update
- How to setup skimmer control
- How to setup STDL4-4 Powerbar on ProfiLux
- How to change ProfiLux / Mitras LX display language
- How to connect via USB
- How to sync myGHL account to GHL Connect app
- How to update or restore Wi-Fi module firmware
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to: ProfiLux Wi-Fi setup (Static IP)
- How to restore factory settings
- How to update ProfiLux firmware
- How to use the GHL Logbook
- How to setup Push Notifications
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- How to Setup a GHL Automatic Fish Feeder
- How to Setup a 1-10V Fish Feeder