About This Article
This article will show you how to setup and program a 1-10V fish feeder on the ProfiLux controller.
Due the varying setup differences between 1-10V feeders, we’re going to use the IND Aquatics AF4 Feeder as an example.
What You Will Need…
Before you get started with the 1-10V Feeder setup, make sure you have the following:
ProfiLux 4 / 4e Controller
| Item | Purpose |
| ProfiLux 4 / 4e controller | For controlling the feeder |
| 1-10V Feeder | For connecting to controller & feeding fish |
| Feeder communication cable | For connecting feeder to ProfiLux controller |
ProfiLux Mini / Light Wi-Fi Controller
| Item | Purpose |
| ProfiLux Mini / Light Wi-Fi controller | For controlling the feeder |
| 1-10V Feeder | For connecting to controller & feeding fish |
| Feeder communication cable | For connecting feeder to ProfiLux controller |
Minimum requirements
Before you can use a 1-10V Fish Feeder, make sure your ProfiLux meets the minimum requirements.
ProfiLux 4 / 4e: Firmware 7.40
ProfiLux Mini / Light Wi-Fi: Firmware 1.19
How-to Video
Follow the steps shown in the video below.