Found 12 results for: wifi
...server that offers better performance and scalability. In addition, all myGHL-compatible devices have been prepared for this, with updated device and WiFi module firmware.
All of these changes combined - new server, new devices, and WiFi firmware - bring a noticeable performance improvement, maki...
...width="1/2"]2. Click the Extras tab, then select Default settings
[vc_column width="1/2"]3. Click OK to restore factory settingsProfiLux controller (WiFi) and Mitras LX7 owners: READ THIS
The Wi-Fi chip on your device operates separately from the hardware. When you restore factory settings on th...
...-end of the ethernet cable and connect it to an available port on your router
Navigate to Wi-Fi / LAN settings page
Click on System
In the WiFi / LAN section, click on Settings
All your doser's WiFi / LAN settings will be displayed here.
Configure LAN settings
1. Set the mode to LAN
...
[vc_column width="1/2"][vc_column width="1/2"]
About Mitras LX7 and Wi-Fi connectivity
There are multiple ways to get the Mitras LX7 connected to your Wi-Fi network. The quickest option is to follow the Initial Setup steps shown here.
NOTE: The Initial Setup steps will get you connected via the...
[vc_column width="1/2"][vc_column width="1/2"]
About Mitras LX7 and Wi-Fi connectivity
There are multiple ways to get the Mitras LX7 connected to your Wi-Fi network. The quickest option is to follow the Initial Setup steps shown here.
This article will show you the alternate way to connect the ...
About ProfiLux and Wi-Fi connectivity
There are multiple ways to get the ProfiLux connected to your Wi-Fi network. The quickest option is to follow the Initial Setup steps shown here.
NOTE: The Initial Setup steps will get you connected via the AUTO IP method. After you are connected, you can ...
About ProfiLux and Wi-Fi connectivity
There are multiple ways to get the ProfiLux connected to your Wi-Fi network. The quickest option is to follow the Initial Setup steps shown here.
This article will show you the alternate way to connect the ProfiLux controller (4, 4e, Mini, Light) to your W...
...to smartphone and tablet users.
Go to our downloads page and download the newest version of the Wi-Fi update tool. This will be labeled as WiFi-Module-ESP-Update in the Firmware section.
Open the downloaded folder and unzip it to your desktop or "downloads" folder
-- Eme...
...steps shown here. Once you are connected, you may proceed with the steps below.
Navigate to Wi-Fi / LAN settings page
Click on System
In the WiFi / LAN section, click on Settings
All your doser's WiFi / LAN settings will be displayed here.
Configure Wi-Fi settings
Set the mode to...
...f the Yellow Wi-Fi light on your ProfiLux is ON, then your phone or tablet is connected to its hotspot.[vc_column width="1/2"]9. In the "Connect to a WiFi network" screen, select your Wi-Fi network from the list, type-in the password belonging to your network, then press NEXT
TIP: If a Wi-Fi list...