ProfiLuxControl V5.1.7.2
«
»
Views:
15600
File size:
8.43 MB
Downloads:
4244
Updated:
January 16, 2016
Categories:
PC software (Windows Vista, 7, 8, 10) for ProfiLux 2, 3 & 3.1.
Suitable for: ProfiLux 2, 3 & 3.1 up to firmware 5.17
Knowledge Base
- DSR
-
GHL Doser
- Dosing Unit
-
GHL Doser 2
- How to operate GHL Devices
- How to sync myGHL account to GHL Connect app
- ION Director Initial Setup (Part 2)
- KH Director Initial Setup (Part 1)
- ION Director Initial Setup (Part 3)
- KH Director Initial Setup (Part 2)
- How to switch SA Doser to EXT mode
- KH Director Initial Setup (Part 3)
- How to update Standalone Doser firmware
- How to add your device to myGHL cloud
- About: GHL logo LED color codes
- How to: GHL Doser Emergency Update
- How to assign PAB-devices
- Troubleshooting: GHL Doser Standalone
- How to setup ATO control on SA Doser
- How to backup and restore GHL device settings / probe data
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to update PAB Devices
- How to record probe values
- How to setup GHL Magnetic Stirrers
- How to use the GHL Logbook
- How to setup a dosing pump schedule
- How to connect GHL Doser 2.1 SA to your network (LAN)
- How to connect via USB
- How to restore factory settings
- How to connect GHL Doser 2.1 SA to your network (Wi-Fi)
- ION Director Initial Setup (Part 1)
-
GHL Doser 2.1
- How to operate GHL Devices
- Getting started with your GHL Device
- How to Setup Continuous Mode for GHL Doser
- How to connect via USB
- How to restore factory settings
- How to connect GHL Doser 2.1 SA to your network (Wi-Fi)
- ION Director Initial Setup (Part 1)
- How to sync myGHL account to GHL Connect app
- ION Director Initial Setup (Part 2)
- KH Director Initial Setup (Part 1)
- ION Director Initial Setup (Part 3)
- KH Director Initial Setup (Part 2)
- How to switch SA Doser to EXT mode
- How to add your device to myGHL cloud
- KH Director Initial Setup (Part 3)
- How to update Standalone Doser firmware
- How to assign PAB-devices
- About: GHL logo LED color codes
- How to: GHL Doser Emergency Update
- How to backup and restore GHL device settings / probe data
- Troubleshooting: GHL Doser Standalone
- How to setup ATO control on SA Doser
- How to record probe values
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to update PAB Devices
- How to setup a dosing pump schedule
- How to setup GHL Magnetic Stirrers
- How to use the GHL Logbook
- Doser 2.1 / 2.2: Maintenance and care
- How to connect GHL Doser 2.1 SA to your network (LAN)
-
GHL Doser 2.2
- How to update Standalone Doser firmware
- How to: GHL Doser Emergency Update
- How to setup ATO control on SA Doser
- About: GHL logo LED color codes
- How to update PAB Devices
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to use the GHL Logbook
- How to setup GHL Magnetic Stirrers
- How to Setup Continuous Mode for GHL Doser
- How to restore factory settings
- ION Director Initial Setup (Part 1)
- ION Director Initial Setup (Part 2)
- ION Director Initial Setup (Part 3)
- How to switch SA Doser to EXT mode
-
GHL Doser 2.2 Maxi
- How to operate GHL Devices
- Getting started with your GHL Device
- How to sync myGHL account to GHL Connect app
- ION Director Initial Setup (Part 3)
- KH Director Initial Setup (Part 1)
- How to switch SA Doser to EXT mode
- KH Director Initial Setup (Part 2)
- How to update Standalone Doser firmware
- KH Director Initial Setup (Part 3)
- How to: GHL Doser Emergency Update
- About: GHL logo LED color codes
- How to setup ATO control on SA Doser
- How to add your device to myGHL cloud
- Troubleshooting: GHL Doser Standalone
- How to update PAB Devices
- How to assign PAB-devices
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to use the GHL Logbook
- How to backup and restore GHL device settings / probe data
- How to setup GHL Magnetic Stirrers
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- How to record probe values
- How to restore factory settings
- How to Setup Continuous Mode for GHL Doser
- How to setup a dosing pump schedule
- ION Director Initial Setup (Part 1)
- Doser 2.2 Maxi: Maintenance and Care
- How to connect via USB
- ION Director Initial Setup (Part 2)
- How to: Emergency updates for PAB-devices
- Getting started with your GHL Device
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to connect GHL Doser 2.1 SA to your network (LAN)
- ION Director Initial Setup (Part 1)
- ION Director Initial Setup (Part 2)
- How to switch SA Doser to EXT mode
- How to update Standalone Doser firmware
- How to add your device to myGHL cloud
- How to backup and restore GHL device settings / probe data
- How to setup a dosing pump schedule
- GCC: Change language from German to English
- How to connect GHL Doser 2.1 SA to your network (Wi-Fi)
- How to customize the GHL Dashboard
-
GHL LED & T5 Illumination
- Mitras Lightbar 2
- Mitras LX6
-
Mitras LX7
- Save and load light composer projects
- How to operate GHL Devices
- How to connect via USB
- How to sync myGHL account to GHL Connect app
- How to update or restore Wi-Fi module firmware
- How to: Mitras LX7 Wi-Fi setup (Auto IP)
- How to restore factory settings
- How to add your device to myGHL cloud
- How to backup and restore GHL device settings / probe data
- How to use the GHL Logbook
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- How to control Mitras LX7 via ProfiLux
- How to: Mitras LX7 Emergency Update
- How to: Mitras LX7 Wi-Fi setup (Static IP)
- How to customize the GHL Dashboard
- How to update Mitras LX firmware
- How to calibrate ProfiLux / Mitras touch keys
- How to change ProfiLux / Mitras LX display language
- Illumination control
-
Installation
- Save and load light composer projects
- How to operate GHL Devices
- How to Setup a Mitras Lightbar 3
- How to setup STDL4-4 Powerbar on ProfiLux
- How to setup GHL Flow Sensors
- How to connect GHL Doser 2.1 SA to your network (Wi-Fi)
- How to Setup a GHL Automatic Fish Feeder
- KH Director Initial Setup (Part 1)
- How to Setup a 1-10V Fish Feeder
- KH Director Initial Setup (Part 2)
- KH Director Initial Setup (Part 3)
- Assign functions to 1-10 V interfaces
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to connect GHL Doser 2.1 SA to your network (LAN)
- ION Director Initial Setup (Part 1)
- ION Director Initial Setup (Part 2)
- How to assign PAB-devices
- ION Director Initial Setup (Part 3)
- Level Control and Leakage Monitoring
- How to switch SA Doser to EXT mode
- How to access GHL Devices with GHL Connect App
- Getting started with your GHL Device
- About the ProfiLux Aquatic Bus (PAB)
- ION Director
-
KH Director
- Achieving Alkalinity Stability with the KH Director
- How to: Emergency updates for PAB-devices
- Getting started with your GHL Device
- How to sync myGHL account to GHL Connect app
- KH Director Initial Setup (Part 1)
- KH Director Initial Setup (Part 2)
- KH Director Initial Setup (Part 3)
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- FAQ: KH Director
- KH Director: Change of Adaptive and Add-On Control from P4 Firmware 7.24 / Doser SA 1.37
- How to assign PAB-devices
- KH Director tips and troubleshooting
- How to record probe values
- How to calculate the KHD parameters for EZ DSR control
-
ProfiLux
-
ProfiLux 3
- How to operate GHL Devices
- Conductivity-Salinity calculators vs. ProfiLux calculated values
- How the ProfiLux Aquarium Controller works
- How to setup Feed Pauses with ProfiLux
- How to create custom wave patterns with ProfiLux
- How to setup 1-10V pump control
- Intro to ProfiLux Pump Groups
- How to setup Leakage Detection with ProfiLux
- How to connect via USB
- GHL Vortech controller and Mobius compatibility
- How to switch SA Doser to EXT mode
- How to setup a dosing pump schedule
- KH Director Initial Setup (Part 1)
- How to setup Calcium Reactor control
- How to set fallback states on a Powerbar
- How to control Mitras LX7 via ProfiLux
- KH Director Initial Setup (Part 2)
- How to calibrate the pH probe
- How to update ProfiLux firmware
- ProfiLux Expansion Card installation (How-to)
- How to setup a standard Timer (ON/OFF) function
- KH Director Initial Setup (Part 3)
- How to calibrate the Redox probe
- Programmable Logic Examples
- How to setup non-dimmable light control
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to calibrate the Conductivity probe
- How to setup GHL Flow Sensors
- Which pumps can be controlled by ProfiLux?
- How to setup a Feed Pause delay
- How to setup GHL Magnetic Stirrers
- How to setup power loss monitoring / emergency backup program
- How to setup a CYCLIC Timer function
- How to setup a Maintenance mode delay
- How to add your device to myGHL cloud
- How to stop dosing when pH is above (x)
- How to setup Gen 1 Doser on ProfiLux
- How to assign PAB-devices
- How to restore factory settings
- Level Control and Leakage Monitoring
- How to setup STDL4-4 Powerbar on ProfiLux
- How to setup Vortech pump control
- ION Director Initial Setup (Part 1)
- How to setup email and text notifications
- How to update PAB Devices
- How to setup ATO control with ProfiLux
- How to backup and restore GHL device settings / probe data
- ION Director Initial Setup (Part 2)
- How to record probe values
- How to use the GHL Logbook
- How to setup AWC control with ProfiLux
- ION Director Initial Setup (Part 3)
- Assign functions to 1-10 V interfaces
- Getting started with your GHL Device
- How to setup Maintenance modes with ProfiLux
- How to setup 1-10V lighting control
- How to add a Virtual probe
- How to setup skimmer control
- How to convert Conductivity probe to FW or SW mode
- How to setup return pump control
- How to change ProfiLux / Mitras LX display language
- How to setup heater control
-
ProfiLux 4
- How to operate GHL Devices
- Conductivity-Salinity calculators vs. ProfiLux calculated values
- How the ProfiLux Aquarium Controller works
- How to setup Feed Pauses with ProfiLux
- How to create custom wave patterns with ProfiLux
- How to setup email and text notifications
- How to set fallback states on a Powerbar
- How to setup AWC control with ProfiLux
- How to setup a Maintenance mode delay
- Intro to ProfiLux Pump Groups
- KH Director Initial Setup (Part 3)
- How to record probe values
- How to update ProfiLux firmware
- How to setup Leakage Detection with ProfiLux
- How to Setup a GHL Automatic Fish Feeder
- GHL Vortech controller and Mobius compatibility
- About: GHL logo LED color codes
- How to setup 1-10V pump control
- How to setup STDL4-4 Powerbar on ProfiLux
- How to Setup a 1-10V Fish Feeder
- How to setup Calcium Reactor control
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- How to setup GHL Flow Sensors
- How to calibrate the pH probe
- How to setup GHL Magnetic Stirrers
- How to: ProfiLux 4 / 4e Emergency Update
- How to setup a CYCLIC Timer function
- How to setup a standard Timer (ON/OFF) function
- How to calibrate the Redox probe
- How to stop dosing when pH is above (x)
- How to setup Gen 1 Doser on ProfiLux
- How to setup non-dimmable light control
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to calibrate the Conductivity probe
- How to restore factory settings
- How to setup a dosing pump schedule
- How to connect via USB
- How to setup power loss monitoring / emergency backup program
- ION Director Initial Setup (Part 1)
- How to control Mitras LX7 via ProfiLux
- How to update PAB Devices
- How to add your device to myGHL cloud
- How to update or restore Wi-Fi module firmware
- How to convert a Redox port into a pH port / vise versa
- ION Director Initial Setup (Part 2)
- ProfiLux Expansion Card installation (How-to)
- How to use the GHL Logbook
- How to assign PAB-devices
- How to: ProfiLux Wi-Fi setup (Static IP)
- ION Director Initial Setup (Part 3)
- Programmable Logic Examples
- How to setup Vortech pump control
- KH Director Initial Setup (Part 1)
- Level Control and Leakage Monitoring
- How to switch SA Doser to EXT mode
- How to setup ATO control with ProfiLux
- How to setup a Feed Pause delay
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- How to backup and restore GHL device settings / probe data
- KH Director Initial Setup (Part 2)
- Which pumps can be controlled by ProfiLux?
- Assign functions to 1-10 V interfaces
- Getting started with your GHL Device
- KH Director: Change of Adaptive and Add-On Control from P4 Firmware 7.24 / Doser SA 1.37
- How to setup heater control
- How to setup skimmer control
- How to setup Maintenance modes with ProfiLux
- How to setup return pump control
- How to change ProfiLux / Mitras LX display language
- How to calibrate ProfiLux / Mitras touch keys
- How to convert Conductivity probe to FW or SW mode
- How to setup 1-10V lighting control
- How to add a Virtual probe
- How to setup Push Notifications
-
ProfiLux 4e
- How to operate GHL Devices
- How the ProfiLux Aquarium Controller works
- Conductivity-Salinity calculators vs. ProfiLux calculated values
- How to setup Feed Pauses with ProfiLux
- How to create custom wave patterns with ProfiLux
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- How to setup GHL Flow Sensors
- How to calibrate the pH probe
- How to setup GHL Magnetic Stirrers
- How to: ProfiLux 4 / 4e Emergency Update
- How to setup a CYCLIC Timer function
- How to setup a standard Timer (ON/OFF) function
- How to calibrate the Redox probe
- How to stop dosing when pH is above (x)
- How to setup Gen 1 Doser on ProfiLux
- How to setup non-dimmable light control
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to calibrate the Conductivity probe
- How to restore factory settings
- How to setup a dosing pump schedule
- How to connect via USB
- How to setup power loss monitoring / emergency backup program
- ION Director Initial Setup (Part 1)
- How to control Mitras LX7 via ProfiLux
- How to update PAB Devices
- How to add your device to myGHL cloud
- How to update or restore Wi-Fi module firmware
- How to convert a Redox port into a pH port / vise versa
- ION Director Initial Setup (Part 2)
- ProfiLux Expansion Card installation (How-to)
- How to use the GHL Logbook
- How to assign PAB-devices
- How to: ProfiLux Wi-Fi setup (Static IP)
- ION Director Initial Setup (Part 3)
- Programmable Logic Examples
- How to setup Vortech pump control
- KH Director Initial Setup (Part 1)
- Level Control and Leakage Monitoring
- How to switch SA Doser to EXT mode
- How to setup ATO control with ProfiLux
- How to setup a Feed Pause delay
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- How to backup and restore GHL device settings / probe data
- KH Director Initial Setup (Part 2)
- How to setup email and text notifications
- How to set fallback states on a Powerbar
- How to setup AWC control with ProfiLux
- How to setup a Maintenance mode delay
- Intro to ProfiLux Pump Groups
- KH Director Initial Setup (Part 3)
- How to record probe values
- How to update ProfiLux firmware
- How to setup Leakage Detection with ProfiLux
- How to Setup a GHL Automatic Fish Feeder
- GHL Vortech controller and Mobius compatibility
- About: GHL logo LED color codes
- How to setup 1-10V pump control
- How to setup STDL4-4 Powerbar on ProfiLux
- How to Setup a 1-10V Fish Feeder
- How to setup Calcium Reactor control
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- KH Director: Change of Adaptive and Add-On Control from P4 Firmware 7.24 / Doser SA 1.37
- How to setup return pump control
- How to change ProfiLux / Mitras LX display language
- How to calibrate ProfiLux / Mitras touch keys
- How to convert Conductivity probe to FW or SW mode
- How to setup 1-10V lighting control
- How to add a Virtual probe
- How to setup Push Notifications
- How to setup heater control
- How to setup skimmer control
- How to setup Maintenance modes with ProfiLux
-
ProfiLux Light
- How to operate GHL Devices
- How the ProfiLux Aquarium Controller works
- How to create custom wave patterns with ProfiLux
- How to setup Feed Pauses with ProfiLux
- How to update or restore Wi-Fi module firmware
- How to add your device to myGHL cloud
- How to: ProfiLux Wi-Fi setup (Static IP)
- How to backup and restore GHL device settings / probe data
- How to restore factory settings
- How to update ProfiLux firmware
- How to setup 1-10V pump control
- How to use the GHL Logbook
- Assign functions to 1-10 V interfaces
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- How to: ProfiLux Mini / Light Emergency Update
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- How to setup STDL4-4 Powerbar on ProfiLux
- How to Setup a GHL Automatic Fish Feeder
- How to Setup a 1-10V Fish Feeder
- How to setup a standard Timer (ON/OFF) function
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to setup non-dimmable light control
- How to connect via USB
- How to setup 1-10V lighting control
- How to setup heater control
- How to setup Push Notifications
- How to setup Maintenance modes with ProfiLux
- How to change ProfiLux / Mitras LX display language
-
ProfiLux Mini
- How to operate GHL Devices
- How the ProfiLux Aquarium Controller works
- How to create custom wave patterns with ProfiLux
- How to setup Feed Pauses with ProfiLux
- How to use the GHL Logbook
- How to add your device to myGHL cloud
- How to setup STDL4-4 Powerbar on ProfiLux
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- How to backup and restore GHL device settings / probe data
- How to Setup a GHL Automatic Fish Feeder
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to Setup a 1-10V Fish Feeder
- How to setup Calcium Reactor control
- How to connect via USB
- Assign functions to 1-10 V interfaces
- How to calibrate the pH probe
- How to sync myGHL account to GHL Connect app
- How to calibrate the Redox probe
- How to update or restore Wi-Fi module firmware
- How to calibrate the Conductivity probe
- How to: ProfiLux Wi-Fi setup (Static IP)
- How to setup 1-10V pump control
- How to restore factory settings
- How to setup a standard Timer (ON/OFF) function
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- How to update ProfiLux firmware
- How to setup non-dimmable light control
- How to: ProfiLux Mini / Light Emergency Update
- How to setup 1-10V lighting control
- How to setup skimmer control
- How to setup Push Notifications
- How to change ProfiLux / Mitras LX display language
- How to setup heater control
- How to setup Maintenance modes with ProfiLux
- How the ProfiLux Aquarium Controller works
- Assign functions to 1-10 V interfaces
- How to Setup a Mitras Lightbar 3
- How to: Emergency updates for PAB-devices
- How to sync myGHL account to GHL Connect app
- GHL Vortech controller and Mobius compatibility
- How to: Control Propeller Breeze fan via ProfiLux
- How to setup Calcium Reactor control
- How to setup a SHORT Timer function (seconds)
- Getting started with your GHL Device
- How to calibrate the pH probe
- How to use the GHL Logbook
- How to calibrate the Redox probe
- How to calibrate the Conductivity probe
- How to setup 1-10V pump control
- GCC: Change language from German to English
- How to setup STDL4-4 Powerbar on ProfiLux
- How to add your device to myGHL cloud
- How to backup and restore GHL device settings / probe data
- How to connect via USB
- How to setup heater control
- How to customize the GHL Dashboard
- How to setup 1-10V lighting control
- How to change ProfiLux / Mitras LX display language
-
ProfiLux 3
-
Sensorfunctions
- Level Control and Leakage Monitoring
- How to stop dosing when pH is above (x)
- How to setup ATO control with ProfiLux
- How to setup GHL Flow Sensors
- How to setup AWC control with ProfiLux
- How to setup a CYCLIC Timer function
- How to setup Leakage Detection with ProfiLux
- How to calibrate the pH probe
- How to calibrate the Redox probe
- How to calibrate the Conductivity probe
- How to convert a Redox port into a pH port / vise versa
- How to add a Virtual probe
- How to convert Conductivity probe to FW or SW mode
- How to setup heater control
-
Sensors
- Conductivity-Salinity calculators vs. ProfiLux calculated values
- How to record probe values
- How to setup GHL Flow Sensors
- How to setup ATO control with ProfiLux
- How to setup AWC control with ProfiLux
- How to setup Leakage Detection with ProfiLux
- How to calibrate the pH probe
- How to calibrate the Redox probe
- How to calibrate the Conductivity probe
- How to convert a Redox port into a pH port / vise versa
- How to convert Conductivity probe to FW or SW mode
- How to add a Virtual probe
-
Socket outlet functions
- Which pumps can be controlled by ProfiLux?
- How to setup a SHORT Timer function (seconds)
- How to setup GHL Magnetic Stirrers
- How to stop dosing when pH is above (x)
- How to set fallback states on a Powerbar
- How to setup Calcium Reactor control
- How to setup Gen 1 Doser on ProfiLux
- Programmable Logic Examples
- How to setup a Feed Pause delay
- How to setup a Maintenance mode delay
- How to setup STDL4-4 Powerbar on ProfiLux
- How to setup return pump control
- How to setup heater control
- How to setup skimmer control
-
Software
-
GHL Connect
- The GHL Community translates
- Webcam
- myGHL is moving
- How to Setup a Mitras Lightbar 3
- How to setup Feed Pauses with ProfiLux
- How to setup STDL4-4 Powerbar on ProfiLux
- How to Setup a 1-10V Fish Feeder
- How to setup a standard Timer (ON/OFF) function
- KH Director Initial Setup (Part 2)
- How to record probe values
- How to setup GHL Flow Sensors
- How to setup non-dimmable light control
- KH Director Initial Setup (Part 3)
- How to setup 1-10V pump control
- How to setup a CYCLIC Timer function
- Troubleshooting: GHL Doser Standalone
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- How to setup Gen 1 Doser on ProfiLux
- How to access GHL Devices with GHL Connect App
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to add your device to myGHL cloud
- How to setup control via dosing pumps (Add-on/Adaptive mode)
- How to use the GHL Logbook
- How to connect GHL Doser 2.1 SA to your network (Wi-Fi)
- How to assign PAB-devices
- How to setup GHL Magnetic Stirrers
- How to setup a dosing pump schedule
- How to setup ATO control with ProfiLux
- How to sync myGHL account to GHL Connect app
- How to setup Vortech pump control
- How to stop dosing when pH is above (x)
- How to control Mitras LX7 via ProfiLux
- Initial Setup: GHL Devices (ProfiLux, Doser, Mitras LX7)
- How to setup AWC control with ProfiLux
- How to: ProfiLux Wi-Fi setup (Static IP)
- How to backup and restore GHL device settings / probe data
- How to connect GHL Doser 2.1 SA to your network (LAN)
- Programmable Logic Examples
- Intro to ProfiLux Pump Groups
- How to setup Leakage Detection with ProfiLux
- How to: Mitras LX7 Wi-Fi setup (Auto IP)
- ION Director Initial Setup (Part 1)
- How to setup a Feed Pause delay
- How to setup Calcium Reactor control
- ION Director Initial Setup (Part 2)
- How to setup a Maintenance mode delay
- How to: Control Propeller Breeze fan via ProfiLux
- How to setup power loss monitoring / emergency backup program
- ION Director Initial Setup (Part 3)
- How to Setup a GHL Automatic Fish Feeder
- How to setup a SHORT Timer function (seconds)
- How to setup email and text notifications
- How to set fallback states on a Powerbar
- How to setup return pump control
- How to change ProfiLux / Mitras LX display language
- How to setup 1-10V lighting control
- How to calibrate ProfiLux / Mitras touch keys
- How to setup Push Notifications
- How to setup heater control
- How to setup Maintenance modes with ProfiLux
- How to: Mitras LX7 Wi-Fi setup (Static IP)
- How to delete your myGHL account
- How to setup skimmer control
- How to customize the GHL Dashboard
-
GHL Control Center
- How to: Emergency updates for PAB-devices
- KH Director: Change of Adaptive and Add-On Control from P4 Firmware 7.24 / Doser SA 1.37
- How to Setup a Mitras Lightbar 3
- How to connect via USB
- How to setup GHL Flow Sensors
- How to connect GHL Doser 2.1 SA to your network (Wi-Fi)
- How to update Standalone Doser firmware
- How to: ProfiLux Wi-Fi setup (Static IP)
- How to setup Gen 1 Doser on ProfiLux
- How to: Mitras LX7 Wi-Fi setup (Auto IP)
- How to update PAB Devices
- Intro to ProfiLux Pump Groups
- Troubleshooting: ProfiLux 4 / 4e / Mini / Light
- Troubleshooting: GHL Doser Standalone
- How to setup GHL Magnetic Stirrers
- How to control Mitras LX7 via ProfiLux
- How to connect GHL Doser 2.1 SA to your network (LAN)
- GCC: Change language from German to English
- How to restore factory settings
- How to update ProfiLux firmware
- How to: ProfiLux Wi-Fi setup (Auto IP)
- How to: Mitras LX7 Wi-Fi setup (Static IP)
- How to calibrate ProfiLux / Mitras touch keys
- How to change ProfiLux / Mitras LX display language
- How to update Mitras LX firmware
-
GHL Connect
-
Versia
- Versia Controller